EVERBUILD HARD PLASTIC ADHESIVE 30ML.
DESCRIPTION AND USES
STICK 2 HARD PLASTIC ADHESIVE is a strong, clear, quick drying adhesive suitable for bonding most types of
hard plastic such as rigid PVC, acrylic, polycarbonate, and ABS. Typical applications include repairs to uPVC
guttering, cills and trim, bonding uPVC and ABS non-pressure pipework, automotive fittings, household applications
including repairs to hairdryers, refrigerator doors, irons, vacuum cleaners, plastic toys, record players/AV equipment
etc. HARD PLASTIC ADHESIVE is temperature resistant to 100`C (boiling water) and is also resistant to most
Always open and use this product over a protected work surface.
Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas. Do not breathe vapour.
Remove cap and pierce inner membrane. As quality and type of plastic can vary, always test an inconspicuous area prior
to full application. Apply a thin and even film to both surfaces. Assemble immediately. Repositioning can take place
within 10 minutes of bonding. Full strength is obtained after 24 hours @20`C.
Replace cap immediately after use to keep adhesive usable.